On-Line Electronics Course

This is a self-paced Professional Development Course for Teachers. You should download and print out the associated reference at - http://www.southwest.com.au/~jfuller/electronics/electronic1.htm

The Course consists of a number of "MODULES". The Course may be completed in any TEN WEEK period.

At the successful completion of the Course you will be issued a "Completion Certificate" incorporating a statement of the number of hours spent on the Course as indicated in the table below.

Each MODULE consists of background information and diagrams. Having read carefully though a MODULE you should conduct research of your own (particularly from the Internet) in preparation for an on-line QUIZ. The Quizzes are relatively simple. It is expected that you will achieve a perfect score. Less than a perfect score may result in you not receiving a Completion Certificate.

J. P. FULLER - T.C, T.H.C, B. Ed, Grad. Cert. Ed. (Computer-Based Instructional design), M. Ed, Cert IV in Workplace Assessment and Training

Course Outcomes:
At the completion of this Course you will have the basic skills required to understand the electronics principles used in the I/O Interfaces described on this Site.

At the completion of the Course you will be asked to send a self-addressed, stamped A4-size envelope so that you can receive your Completion Certificate.

You may register for this Course by filling out the form below. When you successfully complete the Course you will be issued a "Completion Certificate". If you intend using this course as official after-hours Professional Development you should seek the approval of your school principal before you register.

MODULE	PD Time
1 Resistors	1 hour
2 Diodes	1 hour
3 Capacitors	1 hour
4 Transistors	1 hour
5 Integrated Circuits	1 hour
6. Relays	1 hour
7. Voltage Regulators	1 hour